AI with Flow pressure measuring
The following sections show the properties of analog inputs (AI) with the subsystem-specific extension "Flow pressure measuring". Analog inputs with the subsystem-specific extension "Flow pressure measuring" are not supported in Desigo 5.x.
Channel configuration properties
The listed properties are displayed in the Hardware and network editor > Inspector window > Properties tab when the data point is selected in the Device view tab.
Number of channels |
|---|
"Number of channels" defines how many channels are used by the data point. If more than one channel is used by the I/O data point, all properties are stored in the first channel. |
Signal type |
|---|
"Signal type" defines the DRA signal type. Available signal types depend on I/O module type. The signal type can be edited. |
COV limit |
|---|
"COV limit" defines the change in the process value that triggers the sending of the process value. Range: 0...32767 (Standardized raw value) |
Unit |
|---|
"Unit" defines the physical unit of the input or the output. |
Save as
|
|---|
"Save as" saves the set parameters of the I/O data point as an xml-file. |
Subsystem-specific extension properties
The listed properties are displayed in the BACnet objects editor > Inspector window > Properties > Configuration tab when the data point is selected in the editor table.
✳ Indicates a Siemens proprietary property.
Altitude ✳ |
|
|
|---|---|---|
"Altitude" defines the position of the device above sea level. Range: -50...15000 | ||
Units for altitude, over sea level ✳ |
|
|
|---|---|---|
"Units for altitude, over sea level" defines the unit for the property "Altitude". | ||