QMX3.P36 device properties

The listed properties are displayed in the Hardware and network editor > Inspector window > Properties tab when the device with KNX PL-Link is selected in the Device view tab.

QMX3.P36

General and Catalog information

The General and Catalog Information group provides information about the device.

Property

Description

Default value

Mode

Mode shows the network mode of the device. Read only.

KNX PL-Link

Name

Name is a text field to enter the name of the device. The name is used to identify the device in the device view.

Depends on other settings.

Comment

Comment is a free text field to enter any helpful information on the device.

-

Power consumption

Power consumption shows the power the device consumes. Read only.

Unit: [mA]

The value is used to calculate the remaining power of the KNX rail.

See also power consumption and supply on KNX rail of PXC3 or KNX rail of DXR2.

Depends on the device type.

Short designation

Short designation shows a short description of the device. Read only.

Depends on the device type.

Order number

Order number shows the device type. Read only.

Depends on the device type.

Version

Version shows an internal version of the device. Read only.

-

Description

Description shows a short description of the device. Read only.

Depends on the device type.

Device information

The Device information group provides information about the device and settings valid for all channels.

Property

Description

Default value

Device address (KNX)

Device address (KNX) shows the fixed standard address for devices with KNX PL-Link. Read only.

255

Network address (KNX)

Network address (KNX) shows the network address that was assigned based on the device address (KNX). Read only.

0.2.255

Serial number used

Serial number used defines the method used for device identification.

: The serial number entered in the text field Serial number is used for device identification.

: Device identification has to be done in Web interface. The device has to be in programming mode for Web interface to perform the device identification.

: Device identification has to be done in Web interface.

Serial number

Serial numberis a text field to enter the serial number used for device identification.

Serial number is only enabled and meaningful if Serial number used is enabled.

000000000000

Layout

Layout defines which preloaded page set is used.

List of available page sets

<Select layout>

Language

Language defines the language of the selected page set.

English

German

English

Active unit set

Active unit set defines the unit for the display of the actual temperature and the temperature setpoint.

Metric (Centigrade)

British (Fahrenheit)

Metric (Centigrade)

Create BACnet object

Each item defines if BACnet object matching the function is created. Every function that is enabled under Functions should be selected.

: A BACnet object is created..

: No BACnet object is created.

Room climate operating mode

Temporary comfort

Setpoint shift

Fan Speed

Alarming

Property

Description

Default value

Alarming

: Alarming is disabled.

: Alarming is enabled. An Event Enrollment (EE) object is created.

: Alarming is disabled

Functions

The functions table in the Channel Overview provides an overview of the channels of the device. Depending on the device the values in the table are read only or can be edited. The available types depend on the device and the application function.

Property

Description

Name

Name of the channel. Read only.

Type

Name of the function.

Zone

Part of the geographical address of the device.

Range: 1...126

Room

Part of the geographical address of the device.

Range: 1...63

Subzone

Part of the geographical address of the device.

Range: 1...15

Note
Each channel has to be in a separate subzone.

Some of the functions can be configured. The properties of those functions are described below in alphabetical order.

Energy efficiency function (EEF)

Property

Description

Default value

Activate

Activate enables or disables the "Green Leaf" function.

: The function is enabled.

: The function is disabled.

: The function is enabled.

EEFEnable

EEFEnable defines the behavior of the button below the "Green Leaf" LED.

: The application is reset to energy-efficient parameter values when the user presses the button.

: The parameter values are not changed when the user presses the button.

: The application is reset to energy-efficient parameter values when the user presses the button.

Change to green

Change to green defines the conditions for the "Green Leaf" LED to turn green.

Satisfactory

Good

Excellent

Good

Room temperature sensor (RTS)

Property

Description

Default value

Activate

Activate defines if the room temperature is measured and reported.

: The room temperature is measured and reported.

: The room temperature is neither measured nor reported.

: The room temperature is measured and reported.

Change of value, COV

Change of value, COV defines the change in the process value that triggers the sending of the process value.

Range: 0.1...100 [K]

0.1

Heartbeat

Heartbeat defines the time interval to report the process value if the value did not change or the change was smaller than the Change of value, COV.

Range: 120...900 [s]

120

Minimum repetition time

Minimum repetition time defines the minimal time interval before the next process value can be sent.

Range: 10...120 [s]

10

Scene sensor (SCS)

Property

Description

Default value

Activate

Activate defines if scenes are available to the user.

: Scenes are available to the user.

: Scenes are not available to the user.

: Scenes are available to the user.

Memorize

Memorize defines if scenes can be saved using teach-in.

: Teach-in is activated. Current settings for scenes can be saved.

: Teach-in is not activated. Current settings for scenes cannot be saved.

: Teach-in is activated.

Number of scenes

Number of scenes defines the total number of scenes shown in the table.

Range: 0...16

0

TeachInDisable

TeachInDisable defines if the current settings for a given scene can be saved. Read only.

: Teach-in for the scene is enabled. With a long key press the user can save the current states of the actuators to a scene.

: Teach-in for the scene is disabled. The user cannot save the current states of the actuators to a scene.

: Teach-in enabled

Active

Active defines if a predefined scene is available on the room operator unit.

: The user cannot select the scene.

: The User can select the scene.

: The User can select the scene.

Number

Number defines to which predefined scene the settings in the row apply.

Range: 0...15

Depends on other settings.

User fan speed setting (UFS)

Property

Description

Default value

Activate

Activate defines if the user can change the fan speed setting.

: User can change the fan speed setting.

: User cannot change the fan speed setting.

: User can change the fan speed setting.

Number of stages1)

Number of stages defines the type of speed control of the connected fan.

Range: 1...100

1...3: staged speed control fan (1, 2, 3 stages)

4...99: not supported

100: variable speed control

1

Manual mode

Sets the priority for the property.

Range: 1...16

1

Operation limit for fan speed

Sets the priority for the property.

Range: 1...16

1

Enable rapid ventilation1)

Enable rapid ventilation defines if the user can start rapid ventilation.

: User can start rapid ventilation.

: User cannot start rapid ventilation.

: User cannot start rapid ventilation.

1) If the subsystem specific extension KNX PL-Link: FSA (APrcVal - subsystem-specific extension) of the BACnet object Analog process value object (APrcVal) is enabled, you have to configure this property in the BACnet objects editor or in Web interface.

User HVAC display

Property

Description

Default value

Outside sensor zone

Outside sensor zone defines which outside sensors provide data to the room operator unit.

Outside sensors are assigned to outside sensor zones instead of geographical addresses (building zone, room, subzone).

Range: 1...31

Depends on other settings.

User HVAC room settings (UHRS)

Property

Description

Default value

Activate

Activate defines if the user can change HVAC room settings.

: The user can change HVAC room settings.

: The user cannot change HVAC room settings.

: The user can change HVAC room settings.

Manual mode

Sets the priority for the property.

Range: 1...16

1

Operation limit for operation mode

Sets the priority for the property.

Range: 1...16

1

Operation limit for setpoint

Sets the priority for the property.

Range: 1...16

1

Operation limit for presence button

Sets the priority for the property.

Range: 1...16

1

Setpoint resolution

Setpoint resolution defines the smallest adjustment of the room temperature setpoint that users can make.

Range: 1...20 [1/10 K]

1

Supported modes

Supported modes defines the room operating modes available to the user.

: The given room operating mode is not available to the user.

: The given room operating mode is available to the user.

Disable auto

Disable comfort

Disable PreComfort

Disable economy

Disable protection

: All modes enabled

User presence switch (UPS)

Property

Description

Default value

Activate

Activate defines if the user can change the room occupancy mode.

: The user can change the room occupancy mode.

: The user cannot change the room occupancy mode.

: The user can change the room occupancy mode.

Operation limit for presence status

Sets the priority for the property.

Range: 1...16

1