Installing an ABT project (no subcontracting)

The project owner installs the automation stations within an ABT Site project without a subcontractor. The installation includes configuration and download, point test, report creation and upload.

1	In the ABT Site project, set up the connection.	Connect and disconnect
2	Connect the laptop to the automation station.	Connecting to devices
3	Open Startup > Configure and download.	Configure and download
4	Configure the automation station (node setup).	Manually configuring devices
5	Download the configuration.	Downloading device configurations
6	Launch the web interface of the automation station (go to web interface).	Connecting to the web interface of the device
7	Assign networked devices to the automation station.	Assigning KNX PL-Link devices
8	Test data points	Testing KNX PL-Link data points
9	Create an installation report.	Reports
10	Open Startup > Global functions.	Global functions
11	Update the project data base with the current device configuration of automation stations.	Uploading runtime instance data

If a subcontracor is used, the project data has to be handed over to an installer in form of a working package (Pack & Go).
Installing an ABT project (with subcontracting)

Possible next step: commissioning an ABT project.
Commissioning an ABT project