Global functions

Configure and download

Configure and download

Global functions

Current task

Export

Export

Commissioning and diagnostics

Commissioning and diagnostics

Command list

Allows you to select from a predefined list of parameters based on commands to be performed: air balancing, water balancing, lights and blinds, etc.

Engineering unit

Allows you to select from a predefined list of engineering units: International system (SI), US system of units, Imperial system of units, and Canadian system of units.

(Parameter selection check box)

This check box allows for the selection of parameters to be commanded.
Note
This column can be filtered by using T or True to show only the checked rows and F or False to show only the unchecked rows.

Description

Displays the name of the parameter to be commanded.

Units

Unit of measurement.

Value

The value of the command to be sent to the selected device(s).

Report list

Allows you to select a list of commands to report on. Choices include: Air Balancer Reporting List, Lights Reporting List, and Water Balancer Reporting List.

Tag

Displays the name of the parameter to be reported. All selections are read-only.

Select work package

Allows you to select from a list of devices organized by Pack & Go files received or All Devices

Authentication

Displays the authentication state.
Entering authentication credentials

Name

Lists the building element or device name. An expander to the left of building elements allows you to view the building structure.

Location

Lists the location of the device.

Equip-ID

Reference to mechanical plans and prints.

Serial number

Lists the serial number of the associated device.
Adding the serial number

Address

Lists the IP address and UDP port for IP devices, or network number and MAC address for MS/TP devices (e.g., 7001-23. Where the network number is 7001 and the MAC address is 23).

Object

Lists the name of the parameter.

Value

The value of the command to be sent to the selected device(s).

Units

Unit of measurement.

Discover

Opens the Discovery dialog box.

You can choose to discover devices in the Local network or the Remote network.

Selecting Locally connected devices displays only connected devices based on the network specified. Default is All devices.

Clear table

Clears the contents of the Discovered devices table.

Authentication

Displays the authentication state.
Entering authentication credentials

Message

Displays messages received from the device.

Status

Lists the status of the device.

Name

Lists the building element or device name. An expander to the left of building elements allows you to view the building structure.

Location

Lists the location of the device.

Equip-ID

Reference to mechanical plans and prints.

Serial number

Lists the serial number of the associated device.

Address

Lists the IP address and UDP port for IP devices, or network number and MAC address for MS/TP devices (e.g., 7001-23. Where the network number is 7001 and the MAC address is 23).

Object

Lists the name of the parameter.

Value

The value of the command to be sent to the selected device(s).

Units

Unit of measurement.

Preview

Performs the command(s) selected in the command editor table. Displays the current value state for all selected parameters below each selected device. You can choose to perform the command values or cancel. This button is enabled when:

• The command tab is selected
• At least one parameter is selected
• At least one device or building element is selected

Release

Returns values to original state. This button is enabled when the Command tab is selected.

Upload report data

Issues read requests to the selected devices based on the parameters contained in the selected tag list. The button is enabled when:

• The Report tab selected.
• At least one configured device is selected (objects are ignored in the editor) in either the Engineered devices or Discovered devices tabs.

Create uploaded data reports

Opens a dialog box for the selection of a report type and the devices to be contained in the report. You can create a series of reports that display device status, device instance data, etc., in the Reports component viewing area.

Go to web interface

Opens the web interface of the selected device in the Web interface component window. A device must be configured.
Connecting to the web interface of the device
Note
You can only go to the web interface when the device is configured and reachable as indicated by blue highlighting.

Provide authentication

Opens the Authentication dialog box. You must enter your User name and Password to login to the device.
Entering authentication credentials

Preview

Performs the command(s) selected in the command editor table. Displays the current value state for all selected parameters below each selected device. You can choose to perform the command values or cancel. This button is enabled when:

• The command tab is selected
• At least one parameter is selected
• At least one device or building element is selected

Release

Returns values to original state. This button is enabled when the Command tab is selected.

Upload report data

Issues read requests to the selected devices based on the parameters contained in the selected tag list. The button is enabled when:

• The Report tab selected.
• At least one configured device is selected (objects are ignored in the editor) in either the Engineered devices or Discovered devices tabs.

Create uploaded data reports

Opens a dialog box for the selection of a report type and the devices to be contained in the report. You can create a series of reports that display device status, device instance data, etc., in the Reports component viewing area.

Go to web interface

Opens the web interface of the selected device in the Web interface component window. A device must be configured.
Connecting to the web interface of the device
Note
You can only go to the web interface when the device is configured and reachable as indicated by blue highlighting.